18-21 Oct. 2017

Popular: Pre-Registration Why Exhibit Gallery

Home / For Visitors / 2017 Product List / Auto feeding , Double-end fixed length, drilling, mortise and Sprayed tenon Machine

2017 Product List

 

 

Auto feeding , Double-end fixed length, drilling, mortise and Sprayed tenon Machine

 

Exhibitor: HUAN HUNG INDUSTRIAL CO., LTD.

Category: Solid woodworking

Booth No.: E9

 

Inquire Now

 

 

Characteristic

 

Equipment with head instructions are as follows:

Head 1: 2:
Two vertical sawing processing groups, one at the fixed end and one at the moving end. For precision fixed length.
Main saw: 3HP, 2800rpm / 5000rpm frequency control
Main saw the max. dia. : 250mm
These machining groups operate on precision rails and are precisely cut.



Head 3,4:
Horizontal drilling group, model "03UFL", one located on the mobile side.
MOTOR: 2HP, 3000rpm / 5000rpm frequency control
The drill bags provided on each group are replaceable and can be rotated 360 degrees.
Each group with drilling Tsui 3, drill hole spacing of 32mm
These drill processing groups operate on rails, faster, with precise drilling, vertical and vertical directions.
The stroke limit device controls the drilling depth.



Head 5,6,7,8:
Four dowels, two at the fixed end and two on the moving end. For precision fixed length.
Main saw: 7.5HP, 3000rpm / 6000rpm speed control
Installation tool size: Dia. 40mm, 90mm(L)
These machining units are operated on precision rails and are manually adjustable in both horizontal and vertical directions.



Nose 9,10:
One rounded tenon machining group, one at the fixed end and one at the moving end. Each group is equipped with three adjustable injectors.
Min. center distance: 16mm
Max. center distance: 150mm
Each group is equipped with a vibrating tank
2 cans, one for glue, one for tenon.
Machinable diameter 6 and 8mm round bar tenon.

 

All Products (5)

 

Others product

 

 

 

TOP